KBDFS(8)                                                 KBDFS(8)

          kbdfs, console - keyboard and console filesystem

          aux/kbdfs [ -Dd ] [ -s srv ] [ -m mntpnt ] [ consfile ]

          mount -b /srv/cons /dev

          console [ cmd args... ]

          Started on boot(8), kbdfs translates raw keyboard scancodes
          from /dev/scancode (see kbd(3)) and its kbin and kbdin file
          and optionally reads console input from consfile to provide
          initial keyboard and console input.

          It serves a one-level directory containing the files cons,
          consctl, kbd, kbdin, kbin and kbmap.

          The -D flag enables a debug trace of 9p messages and -d pre-
          vents kbdfs from making its memory private.

          The -s option causes kbdfs to post its channel on /srv/srv.
          On system startup, boot(8) sets this to cons. With the -m
          option, kbdfs mounts itself on mntpnt (see bind(2)), other-
          wise on /dev (the default).

          The console command executes cmd (defaults to the system
          shell) under its own kbdfs instance providing a serial con-
          sole if $console environment variable is set.

          Reading the cons file returns characters typed on the con-
          sole.  Normally, characters are buffered to enable erase and
          kill processing. A control-U, `^U', typed at the keyboard
          erases the current input line (removes all characters from
          the buffer of characters not yet read via cons), and a back-
          space erases the previous non-kill, non-erase character from
          the input buffer.  The combination control-W, `^W', deletes
          the input last word.  Killing and erasing only delete char-
          acters back to, but not including, the last newline.  Char-
          acters typed at the keyboard actually produce 16-bit runes
          (see utf(6)), but the runes are translated into the
          variable-length UTF encoding (see utf(6)) before putting

     KBDFS(8)                                                 KBDFS(8)

          them into the buffer. A read(2) of a length greater than
          zero causes the process to wait until a newline or a `^D'
          ends the buffer, and then returns as much of the buffer as
          the argument to read allows, but only up to one complete
          line.  A terminating `^D' is not put into the buffer.  If
          part of the line remains, the next read will return bytes
          from that remainder and not part of any new line that has
          been typed since.

          If the string rawon has been written to the consctl file and
          the file is still open, cons is in raw mode: characters are
          not echoed as they are typed, backspace, `^U,' `^W' and `^D'
          are not treated specially, and characters are available to
          read as soon as they are typed.  Ordinary mode is reentered
          when rawoff is written to consctl or this file is closed.

          A write (see read(2)) to cons causes the characters to be
          printed on the console screen.

          When a consfile is passed to kbdfs(8) as its last argument,
          it reads and processes the characters from that file and
          forwards them to the cons file with the same text processing
          applied as on keyboard input.  This is used to provide a
          serial console when $console environment variable is set.
          (see plan9.ini(8)).

          Holding `Ctrl' + `Alt' and then pressing the `Del' key will
          trigger a reboot of the terminal.  To forward this sequence
          downstream, `Shift' + `Ctrl' + `Alt' and then pressing `Del'
          will cause to send a `Shift' up before the `Del' key.  This
          is useful for programs like vnc(1) and vmx(1).

          A read on the kbd file returns the character k, K or c fol-
          lowed by a null terminated, variable-length, UTF encoded
          string. The k message is sent when a key is pressed down and
          K when a key is released. The following string contains all
          the keycodes of the keys that are currently pressed down in
          unshifted form. This includes all keys that have a keyboard
          mapping and modifier keys.  The string following the c mes-
          sage contains the single character that would have been
          returned on the cons file instead. The c message will be
          resent at the keyboard repeat rate.  A single read(2) can
          return multiple concatenated messages at once (delimited by
          the null byte) or block when there are no messages queued.
          Opening the kbd file disables input processing on the cons
          file until it is closed again.

          K, k and c messages can be written to kbdin and will for-
          warded to the reader of cons or kbd.  Writing a r or R mes-
          sage followed by a UTF encoded rune will simulate the press
          or release of that particular rune.

     KBDFS(8)                                                 KBDFS(8)

          Raw scancodes can be written to the kbin file for external
          keyboard input (used for USB keyboards).

        Keyboard map
          PS/2 keyboards generate one and two byte scancodes sequences
          which give keyboard events relative to physical key loca-
          tion.  These codes are then translated to Unicode runes
          using a series of tables hereafter referred to as layers.
          The true mapping of scancodes is locale and potentially
          device specific.

          The PS/2 interface presents two physical layers, switched on
          if the input scancode is one or two bytes. This second
          "escaped" layer is typically generated for keys like `Home'
          and `Ins'.  Kbdfs additionally maintains eight more virtual
          layers that are switched on `Shift', `Ctl', `AltGr', and
          `Mod4' modifier key state. Not all permutations of these
          modifiers are represented as layers, the exhaustive list is
          as follows:

          none           Key
          shift          Shift + Key
          esc            Escaped Key
          altgr          AltGr + Key
          ctl            Ctl + Key
          ctlesc         Ctl + Escaped Key
          shiftesc       Shift + Escaped Key
          shiftaltgr     Shift + AltGr + Key
          mod4           Mod4 + Key
          altgrmod4      AltGr + Mod4 + Key

          These layers can be accessed with the kbmap file. A map
          entry is a line containing three whitespace separated
          fields: the layer name, the scancode, and the resulting Uni-
          code value. A layer may also historically be addressed by
          its numeric index in the above list.  A Unicode value of
          zero indicates to drop that particular input.

          Reads return the current contents of the map.  Each map
          entry has its fields padded to 11 characters.

          Writes accept new map entries.  Numeric values are taken to
          be decimal unless they start with 0x (hexadecimal) or 0
          (octal).  The Unicode character can also be represented as
          'x where x gives the UTF-8 representation of the character
          (see utf(6)), or as ^X to represent a control character.

          Opening kbmap with OTRUNC resets the map back to the
          preloaded ascii defaults.

          cons(3), keyboard(6), utf(6), kbd(3), plan9.ini(8)

     KBDFS(8)                                                 KBDFS(8)



          Kbdfs first appeared in 9front (May, 2011).